 |
Filtering 2-51th harmonic current for three phase 208-690V/50(60)Hz system of with 35~150A rating CT sampling from grid or loads side.
APFM-0.4-50a(b)/T(F)L
Wall mounted and rack mounted
Sanhe
| PDF Export | |
Specific information:
The active power filter (APF) is actively harmonic current filter. It can detect the sampling current through the current transformer, calculates through the internal adaptive control algorithm and then sends the PWM signal to the internal IGBT to control the converter to generate a harmonic current to the grid, comparing to actual harmonic current ,which has same size but opposite in direction.
Feature:
Adopt the latest IGBT technology with a high switching frequency up to 20KHz
Quick responses and minimal thermal-and electric energy losses
Quickly responding DSP+FPGA processors control the platform.
DSP full digital control systems, which can immediately respond to load changes
Unique spacious design for best thermal management.
Best-in-business three level topology that can better offset the current approach to the sine wave compared with additional two-level inverters.
Technical data:
Item | Description | |
Main Function | Harmonic Filter | Setting filtering from 2-51 times(under only harmonic filtering function) While choose priority, the harmonic filtering is 2-13th |
Auto/Priority function(customized) | The user can also set the priority function, including H+Q/ Q+H/Q+H+B/H+Q+B (Q power factor, H harmonic filtering, B, unblance ) | |
Application | Hotel,Car park, Car charger station,Car 4S store,IDC, hospital,Railway,water treatment and other non-liner load | |
Electrical | Rated voltage | 208-690Vac |
Wiring | 3P4W/3P3W | |
Frequency | 50(60)±2Hz | |
Capacity | 35~150A(According to SVG type) | |
Module Consumption | ＜2kW | |
Efficiency | Up to 97.5% | |
switching frequency | 20kHz | |
Response time | Fast response time＜50μs Total response time＜5ms | |
CT ratio | 150:5~6000:5 | |
Parallel | Max.5 (customization acceptable) | |
Terminals | Communication | RS485 |
Environment | Operating environment | In-door, free from moisture, dust, corrodent or flammable gases, oil mist, vapor, water leakage or salt water. |
Altitude | <1000m （customized acceptable） | |
Work temperature | -20℃~+50℃( derating is required from 40℃ to 50℃, increase every 1℃ above 40℃, derating 2%, highest temperature allowed: 50℃ ) | |
Humidity | Less than 95%RH, no condensing | |
Storage temperature | -20℃~+70℃ | |
Vibration | Less than 5.9m/s2 (0.6g) | |
Enclosure | Protection degree | IP20 |
Colour | 7035 gray (customization acceptable) | |
Size | According to APF type(refer: APF Dimensions) | |
Cooling | Fan cooling | |
Standard:
Model Guide
Model | Rated Capacity(kVAR) | Wring | Installation |
APFM0.4-35a(b)/T(F)L | 35 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM0.4-50a(b)/T(F)L | 50 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM0.4-75a(b)/T(F)L | 75 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM0.4-100a(b)/T(F)L | 100 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM Dimension
(mm) | Rack mounted | Wall mounted | ||||||
35A/50A | 75A | 100A | 150A | 35A/50A | 75A | 100A | 150A | |
A | 437 | 480 | 480 | 550 | 400 | 440 | 440 | 510 |
B | 420 | 460 | 460 | 532 | 240 | 360 | 360 | 360 |
C | 400 | 440 | 440 | 510 | / | / | / | / |
D | 205 | 232 | 232 | 250 | 205 | 232 | 232 | 250 |
E | 88 | 88 | 88 | 88 | 545 | 610 | 610 | 610 |
F | 58 | 72 | 72 | 81 | 80 | 40 | 40 | 75 |
G | 563 | 652 | 652 | 660 | 573 | 636 | 636 | 648 |
H | 497 | 576 | 576 | 585 | 497 | 576 | 576 | 585 |
K | 40 | 40 | 40 | 40 | / | / | / | / |
FAQ
Q: What is APF Working principles ?
A:1.External current transformer(CT)could detect real-time load current .
2.Internal DSP calculates and analyzes the reactive power content of the system.
3.Control PWM to send signal to IGBT to generate reactive power compensation current for power factor compensation.
Q: How to choose the model number?
A: Please specify the APF rated voltage,frequency ,3p3w/3p4w,rated capacity,CT sampling position(grid or load side).
Q:What is the standard packaging?
A: 1*manual(or electronic manual)
1*protection cover(only for wall mounted type,1 module 1 cover)
Q:How to prepare APF/SVG module before installation?
A:1. the standard package is not packed with breaker and current transformer. If need,please advise while ordering.
2.We recommended open-type current transformer for easy installation.
open-type current transformer
3.APF module should be protected by superior breaker. If the breaker is not installed,it is not convenient and protective for debug etc.
Specific information:
The active power filter (APF) is actively harmonic current filter. It can detect the sampling current through the current transformer, calculates through the internal adaptive control algorithm and then sends the PWM signal to the internal IGBT to control the converter to generate a harmonic current to the grid, comparing to actual harmonic current ,which has same size but opposite in direction.
Feature:
Adopt the latest IGBT technology with a high switching frequency up to 20KHz
Quick responses and minimal thermal-and electric energy losses
Quickly responding DSP+FPGA processors control the platform.
DSP full digital control systems, which can immediately respond to load changes
Unique spacious design for best thermal management.
Best-in-business three level topology that can better offset the current approach to the sine wave compared with additional two-level inverters.
Technical data:
Item | Description | |
Main Function | Harmonic Filter | Setting filtering from 2-51 times(under only harmonic filtering function) While choose priority, the harmonic filtering is 2-13th |
Auto/Priority function(customized) | The user can also set the priority function, including H+Q/ Q+H/Q+H+B/H+Q+B (Q power factor, H harmonic filtering, B, unblance ) | |
Application | Hotel,Car park, Car charger station,Car 4S store,IDC, hospital,Railway,water treatment and other non-liner load | |
Electrical | Rated voltage | 208-690Vac |
Wiring | 3P4W/3P3W | |
Frequency | 50(60)±2Hz | |
Capacity | 35~150A(According to SVG type) | |
Module Consumption | ＜2kW | |
Efficiency | Up to 97.5% | |
switching frequency | 20kHz | |
Response time | Fast response time＜50μs Total response time＜5ms | |
CT ratio | 150:5~6000:5 | |
Parallel | Max.5 (customization acceptable) | |
Terminals | Communication | RS485 |
Environment | Operating environment | In-door, free from moisture, dust, corrodent or flammable gases, oil mist, vapor, water leakage or salt water. |
Altitude | <1000m （customized acceptable） | |
Work temperature | -20℃~+50℃( derating is required from 40℃ to 50℃, increase every 1℃ above 40℃, derating 2%, highest temperature allowed: 50℃ ) | |
Humidity | Less than 95%RH, no condensing | |
Storage temperature | -20℃~+70℃ | |
Vibration | Less than 5.9m/s2 (0.6g) | |
Enclosure | Protection degree | IP20 |
Colour | 7035 gray (customization acceptable) | |
Size | According to APF type(refer: APF Dimensions) | |
Cooling | Fan cooling | |
Standard:
Model Guide
Model | Rated Capacity(kVAR) | Wring | Installation |
APFM0.4-35a(b)/T(F)L | 35 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM0.4-50a(b)/T(F)L | 50 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM0.4-75a(b)/T(F)L | 75 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM0.4-100a(b)/T(F)L | 100 | 3p3w/3p4w | Wall mounted/ Rack type |
APFM Dimension
(mm) | Rack mounted | Wall mounted | ||||||
35A/50A | 75A | 100A | 150A | 35A/50A | 75A | 100A | 150A | |
A | 437 | 480 | 480 | 550 | 400 | 440 | 440 | 510 |
B | 420 | 460 | 460 | 532 | 240 | 360 | 360 | 360 |
C | 400 | 440 | 440 | 510 | / | / | / | / |
D | 205 | 232 | 232 | 250 | 205 | 232 | 232 | 250 |
E | 88 | 88 | 88 | 88 | 545 | 610 | 610 | 610 |
F | 58 | 72 | 72 | 81 | 80 | 40 | 40 | 75 |
G | 563 | 652 | 652 | 660 | 573 | 636 | 636 | 648 |
H | 497 | 576 | 576 | 585 | 497 | 576 | 576 | 585 |
K | 40 | 40 | 40 | 40 | / | / | / | / |
FAQ
Q: What is APF Working principles ?
A:1.External current transformer(CT)could detect real-time load current .
2.Internal DSP calculates and analyzes the reactive power content of the system.
3.Control PWM to send signal to IGBT to generate reactive power compensation current for power factor compensation.
Q: How to choose the model number?
A: Please specify the APF rated voltage,frequency ,3p3w/3p4w,rated capacity,CT sampling position(grid or load side).
Q:What is the standard packaging?
A: 1*manual(or electronic manual)
1*protection cover(only for wall mounted type,1 module 1 cover)
Q:How to prepare APF/SVG module before installation?
A:1. the standard package is not packed with breaker and current transformer. If need,please advise while ordering.
2.We recommended open-type current transformer for easy installation.
open-type current transformer
3.APF module should be protected by superior breaker. If the breaker is not installed,it is not convenient and protective for debug etc.