Please Choose Your Language
 |
key component for power factor correction of three phase 220-690V/50（60）Hz system
SC480-30-T/N
Capacitor bank indoor
Self-healing, Oval or Cylindrical
Sanhe
| PDF Export | |
Self-healing type low voltage shunt capacitor is polypropylene film from German advanced production technology techniques and international IEC60831-1 Suitable for low voltage electric network to improve power factor and reduce reactive loss and improve voltage quality
Technical data
Rated voltage（Un） | 400V/415V、440V/450V、480V、525V、690V （Other customizable) |
Rated frequency（Fn） | 50/60HZ |
Rated capacity（Qn） | 5~100 kVAR |
Capacity accuracy | -5% 〜+10% (customization:±3%) |
Interphase unbalance | ≤1.08 |
Overvoltage | l.lUn |
Loss tangent | tgδ≤0.001 |
AC withstand voltage | between poles:2.15un/ 2S between pole and body:3.6KV/5S(un≤660V) |
Overcurrent | 1.3ln |
Self-discharging | remaining 75V after 3 minutes under power-off |
Reliability | 60000/5000 hours(under rated voltage and nominal temperature) Failure is less than 6%/0.5% (1ppm hours) |
Explosion-proof protection | Tensile explosion-proof, 2nd explosion- proof |
Installation Altitude | ≤2000m（Other customizable) |
Standard: | China standard: GB/T 12747.1-2004 GB/T 12747.2-2004 IEC60831-1-2002,IEC60831-2-1995 |
Model Guide
Model NO. | Rated Capacity | Rated Current | Rated Capacity | Oval Size | Cylindrical (mm) | |
kVAR | A | HF | A*B*H(mm) | A*B(mm) | ||
SC450-10-T/N | 10 | 12.8 | 157.2 | 196X72X130 | 179X58 | 76X240 |
SC450-15-T/N | 15 | 19.2 | 235.8 | 196X72X180 | 179X58 | 86X240 |
SC450-20-T/N | 20 | 25.7 | 314.4 | 196X72X210 | 179X58 | 86X285 |
SC450-25-T/N | 25 | 32.1 | 393.3 | 226X110X220 | 210X66 | 96X285 |
SC450-30-T/N | 30 | 38.5 | 471.9 | 226X110X220 | 210X66 | 106X285 |
SC450-40-T/N | 40 | 51.3 | 629.1 | 226X110X260 | 210X66 | 116X285 |
Note: other system voltage capacitor can be done.
FAQ
Q: How to choose the model number?
A: Please specify the system rated voltage,frequency, harmonic current situation etc. If you do not decide, please advise your detailed problem for us to give you a solution.
Q: What is the standard packaging?
A: 1*manual(or electronic manual)
1* plywood carton
Q: Why should we consider harmonic current content?
A: In the application,there are harmonic current more or less. If the capacitor is not matched with the reactor under the harmonic current,the capacitor will be damaged easily.
Q: How to choose capacitor for new-building demand?
A: you can consider from several sides like the below sample.
System Voltage | Harmonic current content | Reactor Detuning rate | Rated Line Voltage | Electrical Wiring | Capacity |
0.38kV | none | - | 0.45kV | 3 phase compensation △ wiring | Cylindrical≤40kvar Entangle ≤50kvar |
5times and above | 7% | 0.48kV | |||
3times and above | 14% | 0.525kV | |||
5times and above | 7% | 0.28kV | 3 phase unbalance compensation Y wiring | Single phase≤20kvar Three phase ≤30kvar | |
3times and above | 14% | 0.3kV |
Self-healing type low voltage shunt capacitor is polypropylene film from German advanced production technology techniques and international IEC60831-1 Suitable for low voltage electric network to improve power factor and reduce reactive loss and improve voltage quality
Technical data
Rated voltage（Un） | 400V/415V、440V/450V、480V、525V、690V （Other customizable) |
Rated frequency（Fn） | 50/60HZ |
Rated capacity（Qn） | 5~100 kVAR |
Capacity accuracy | -5% 〜+10% (customization:±3%) |
Interphase unbalance | ≤1.08 |
Overvoltage | l.lUn |
Loss tangent | tgδ≤0.001 |
AC withstand voltage | between poles:2.15un/ 2S between pole and body:3.6KV/5S(un≤660V) |
Overcurrent | 1.3ln |
Self-discharging | remaining 75V after 3 minutes under power-off |
Reliability | 60000/5000 hours(under rated voltage and nominal temperature) Failure is less than 6%/0.5% (1ppm hours) |
Explosion-proof protection | Tensile explosion-proof, 2nd explosion- proof |
Installation Altitude | ≤2000m（Other customizable) |
Standard: | China standard: GB/T 12747.1-2004 GB/T 12747.2-2004 IEC60831-1-2002,IEC60831-2-1995 |
Model Guide
Model NO. | Rated Capacity | Rated Current | Rated Capacity | Oval Size | Cylindrical (mm) | |
kVAR | A | HF | A*B*H(mm) | A*B(mm) | ||
SC450-10-T/N | 10 | 12.8 | 157.2 | 196X72X130 | 179X58 | 76X240 |
SC450-15-T/N | 15 | 19.2 | 235.8 | 196X72X180 | 179X58 | 86X240 |
SC450-20-T/N | 20 | 25.7 | 314.4 | 196X72X210 | 179X58 | 86X285 |
SC450-25-T/N | 25 | 32.1 | 393.3 | 226X110X220 | 210X66 | 96X285 |
SC450-30-T/N | 30 | 38.5 | 471.9 | 226X110X220 | 210X66 | 106X285 |
SC450-40-T/N | 40 | 51.3 | 629.1 | 226X110X260 | 210X66 | 116X285 |
Note: other system voltage capacitor can be done.
FAQ
Q: How to choose the model number?
A: Please specify the system rated voltage,frequency, harmonic current situation etc. If you do not decide, please advise your detailed problem for us to give you a solution.
Q: What is the standard packaging?
A: 1*manual(or electronic manual)
1* plywood carton
Q: Why should we consider harmonic current content?
A: In the application,there are harmonic current more or less. If the capacitor is not matched with the reactor under the harmonic current,the capacitor will be damaged easily.
Q: How to choose capacitor for new-building demand?
A: you can consider from several sides like the below sample.
System Voltage | Harmonic current content | Reactor Detuning rate | Rated Line Voltage | Electrical Wiring | Capacity |
0.38kV | none | - | 0.45kV | 3 phase compensation △ wiring | Cylindrical≤40kvar Entangle ≤50kvar |
5times and above | 7% | 0.48kV | |||
3times and above | 14% | 0.525kV | |||
5times and above | 7% | 0.28kV | 3 phase unbalance compensation Y wiring | Single phase≤20kvar Three phase ≤30kvar | |
3times and above | 14% | 0.3kV |